Tenergy 6V-12V Universal Battery Pack Charger for NiMH NiCd RC Car Batteries

Features -Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh -Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours -Automatically charging ending with negative delta V -Worldwide usage with 120-240V AC Accessories Included 1 standard Tamiya connector with Temperature Sensor 1 adapter from standard Tamiya to Mini Tamiya 1 adapter from standard Tamiya to a pair of alligator clip Charger Specification Input: AC 100-240V Output: 6-12V, 1A or 2A Operation Instruction -Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh -Battery pack must be made by high drain current cell -Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries WARNING - DO NOT CHARGE LiPO Batteries -DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium. -Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery. Failure to follow these warnings may result in fire or personal injury. Contact our customer support team if you are unsure if your battery can be charged.