Radiolink 2.4GHz R12DS RC Radio Receiver Support SBUS/PWM DSSSandFHSS for Radiolink AT9/AT9S/AT10/AT10II

DSSS&FHSS reduce overall signal interference allow the R12DS to produce a highly constant and stable transmission signal.

Please Note:
1. R12DS only work with Radiolink transmitter products: AT9S, AT9,AT10,AT10II.
2. Short push the ID set switch 2 times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output.
3. Please make sure your Radio's alway 12CH, go to your radio MENUSYSTEMCH-SELECT: 12CH

How to Match Code With Transmitter:
1. Put the transmitter and the receiver close to each other within 50 cm.
2. Turn on the transmitter and R12DS.
3. There is a black button on the R12DS, press the binding button 1 second and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on.
4. The antennas must be keep as straight as possible. Otherwise it will reduce the effective range.

Specifications:
Signal: SBUS,PWM
Channel: PWM 12 channels, SBUS 12 channels
Working Voltage: 4.8-10V
Working Current: 38-45mAinput voltage: 5V
Size: 1.97*1.26*0.59in
Weight: 0.5oz

Package Included:
R12DS receiver x 1